Florida Sodablasting Equipment Dealer New and Used Sales and Service. sodablasting, soda blasting, sodablasting equipment, sodablasting distributor, soda blasting equipment, soda blasting distributor, sodablasting service, soda blasting service, soda blasting service in Georgia, sodablasting supplies, soda blasting supplies
Header

Florida Sodablasting Service & Equipment

 

Looking For Sodablasting Equipment in Florida?

Looking for a Professional Blasting Service?

Welcome to Nutech Refinishing - Professional Sodablasting Service & Authorized Sodablasting Distributor

1- 706-367-8107

Stationary Soda Blasting Equipment

Mobile Soda Blasting Equipment

Soda Blasting Equipment Parts and Accessories


Buster Blaster Model 100

Ask a question about this product

The Buster Blaster 100 is the only true Soda Blaster. It operates using a patented, self-cleaning venturi that requires little or no maintenance. The venturi combined with the metering system in the Buster Blaster soda blaster virtually eliminates downtime because of clogged lines and will deliver a precise and even flow of the blasting medium (Natrium Soda Blasting Medium) so you can complete your work on-time and on budget. A properly adjusted Buster Blaster soda blaster will reduce your use of soda by 20% and still have better on-the-job performance than any modified Sand Blaster.

The Buster Blaster model 100 soda blaster has a capacity of 100 lbs of Natrium Soda, that's two bags.

The package includes:

  • Powder coated 100 lb. soda capacity blast pot
  • Stainless steel plumbing
  • 50 foot blast hose
  • 50 foot wet line
  • 1 nozzle sized for air supply
  • Fill funnel
  • 55 foot red head control line
  • 12 volt switch
  • Air over electric shut off
  • Seven year warranty on pot shell
  • One year warranty on rotary valve

When you order the Buster Blaster 100 soda blaster you should already have a high-volume air compressor. How much capacity do you need? It depends upon the size of the nozzle you are using. When you are using a nozzle with a larger opening, you increase the flow of air and soda and have a larger "brush" to blast with.

Here is a simple chart that shows the air flow required:

Tip Size Minimum CFR required PSI
3/16" 55 125
1/4" 98 125
5/16" 168 125
3/8" 237 125


Our Buster Blaster 100 Mobile unit comes with an air compressor that has a capacity of 210 CFM at 150 PSI It can supply enough air to run two Buster Blaster Soda blaster pots with 1/4 inch nozzles.

Another very important factor to consider when Soda Blasting is the dryness of the air. It is essential to supply the driest air possible to your soda blaster. Sodium Bicarbonate is hydrophilic, it loves water. It will readily absorb any moisture it can find in the air supplied to it. This leads to clogged lines and poor performance. At Soda Works we have been aware of this for years and have developed our proprietary air drying system which consists of our custom air cooling unit coupled with our SW-500 moisture separator. We have spent years perfecting this system to deliver the driest air possible to our Soda Blasters.

If you have your own high-volume compressor and are ordering one or more of our Buster Blaster soda blasters, be sure you also order our fan cooler pack which will deliver the dry air you need to soda blast in the efficient and profitable manner that our soda blasters make possible.


Buster Blaster Model 100 Mobile Soda Blaster

Ask a question about this product

The Buster Blaster 100 Mobile Unit is the Ultimate Soda Blasting product. It is our own patented, custom designed system that will give you the very best soda blasting results period. There is no other system out there marketing itself as a "Soda Blaster" that can come close to the Buster Blaster system. Designed from the bottom up for soda blasting only, our system will complete more trouble-free work in less time using less soda.

How do we do it?

Our complete Soda Blasting system is built around a Sullivan High Pressure air compressor. This compressor is driven by a 78 horse power John Deere diesel and can output 210 CFM at 150 psi. The compressor is trailer mounted so you can simply hitch it up and haul it to your job site.

The air from the compressor is then run through two of our rear-mounted coolers. Cooling the air is a preliminary step to removing the moisture. If there is any moisture in the air you use to soda blast, the soda will clump and the blaster will jam. After the air is cooled it is run through our proprietary moisture separator. When it has passed through this stage the air is ready for the soda blasting pot. But before we send the air to the pot we tap into the line with a regulator that many of our customers use to feed respirators. Soda Blasting can be dirty work, no need to breath all of that.

The cooled, dried air then is delivered to one of our Buster Blaster 100 soda blasting pots. We've said it before and we are saying it again, The Buster Blaster is the only true Soda Blaster. It operates using our patented, self-cleaning venturi that requires little, if any, maintenance. The patented venturi valve, combined with our optimized metering system, virtually eliminates clogged lines and delivers a precise, even flow of the blasting medium.

Our Mobile unit is delivered with one soda blasting pot mounted on the trailer, but the system is designed to be able to provide enough air to keep two soda blasting pots in operation.

The Buster Blaster Mobile unit is truly a turn-key business opportunity. As your workload increases you can simply add another soda blasting pot and you can set another employee to getting the task completed in half the time!

Each Buster Blaster model 100 soda blasting pot has a capacity of 100 lbs of Natrium Soda, that's two bags.

The package includes:

  • Sullivan Hi-Pressure 210 CFM, Max 150 psi.
  • John Deere 78 HP diesel 4045 engine (maximum 210 cfm @ 150 psi)
  • Hydraulic surge brakes
  • Parking brake
  • Spare tire
  • Long tongue
  • 2” ball
  • 4 wire flat connector
  • DOT light package
  • Fuel gauge
  • Temp gauge
  • Oil pressure gauge
  • High temp shut down
  • BB100 Blast Pot
  • Integrated cooling/moisture separator for discharge air
  • Auxiliary air ports
  • All external plumbing stainless steel
  • 100 foot 3/4” id blast hose
  • 1 - #3 Dry nozzle
  • 1 - #5 Dry nozzle
  • All exterior brackets & bumper are powder coated
  • Seven year warranty on pot
  • One year warranty on rotary valve
  • Three year warranty on cooling coil (except puncture and freezing)
  • Warranty on engine by John Deere
  • Warranty of rotary compressor by Sullivan Palatech
  • Package weight 3400 lbs.
  • Tongue weight 180 lbs.


Don't short change yourself. The Buster Blaster 100 Mobile Unit is the only soda blasting system designed from the ground up just for soda blasting. From air delivery to soda delivery, there is no other system that performs like the Buster Blaster 100 system. There is no other system that is as maintenance and trouble free as the Buster Blaster 100 system. There is no other system that uses the blasting medium as efficiently and effectively as the Buster Blaster 100 system.


BB-100 Fan Cooler Pack

Ask a question about this product

Package includes:

  • Twin 12 volt fan coolers (maximum 375 cfm @150 psi)
  • 1 SWS 500 moisture separator
  • 2 - 10 foot connector hoses
  • 1 - 15 foot connector hoses
  • 10 foot 12volt supply wires
  • One year warranty on fan motor
  • Three year warranty on cooling coil (except puncture and freezing).


BB-25 Fan Cooler/Dryer Pack

Ask a question about this product

Package includes:

  • One 12 volt fan cooler (maximum 100 cfm @ 150 psi)
  • Integrated moisture separator
  • 2 - 10 foot connector hoses
  • 1 - 10 foot connector wire
  • One year warranty on fan motor
  • Three year warranty on cooling coil (except puncture and freezing)
  • The air discharged is bone-dry and within 1 degree of ambient temperatures
  • Weight: 40 lbs


BB-100 Eco-Pak

Ask a question about this product

BB-100 SODA BLAST
Basic Economy Package

The Buster Blaster 100 is the only true Soda Blaster. It operates using a patented, self-cleaning venturi that requires little or no maintenance. The venturi combined with the metering system in the Buster Blaster soda blaster virtually eliminates downtime because of clogged lines and will deliver a precise and even flow of the blasting medium (Natrium Soda Blasting Medium) so you can complete your work on-time and on budget. A properly adjusted Buster Blaster soda blaster will reduce your use of soda by 20% and still have better on-the-job performance than any modified Sand Blaster.

The Buster Blaster model 100 soda blaster has a capacity of 100 lbs of Natrium Soda, that's two bags.


Nutech Refinishing, Inc.

Jefferson, GA

Sodablasting Service - Sodablasting Equipment Sales

Mold, Fire, & Smoke Remediation for Alabama, Arkansas, Florida, Georgia,
Louisiana, Mississippi, Oklahoma, South Carolina, Tennessee, Texas

PDgo
Home About Us Links Testimonials Contact Us eMail Us